How-to-Clean-Pavers-on-Your-Patio

How To Clean Pavers On Your Patio In 11 Easy Steps

Looking for an easy way to clean pavers on your patio? One of the tricks is using soda. A mixture of soda and water is an effective, but strongly alkaline cleaning agent. It can be used on particularly dirty concrete pavers. Be sure to wear safety glasses when working, as a soda can irritate the eyes. Work gloves should also not be forgotten.

This is the easiest way to clean pavers on your patio, step by step guide.

How-to-Clean-Pavers-on-Your-Patio

Paving stones are an easy way to create patios or garden paths. Over time, however, the green film forms on the stones, and weeds thrive in the joints. Fortunately, there are some easy ways to clean pavers so they look like new again.

Not only do the plants in your garden need care, but also the garden furniture and even the paving stones on the patio and garden paths need regular cleaning. After being exposed to the elements without any protection in the fall and winter, it’s time for spring paving stone cleaning.

Do You Know Anything About Cleaning Pavers?

Whether it’s a patio or a garden path, pavers create a straight surface. However, cleaning pavers stones is tedious. Or is it? Take the quiz and find out if you use the best technique.

Once a year, you should make this effort and clean the paving stones, because then heavy dirt and weeds will not have a chance to spread in the first place, and cleaning will be much easier.

What Do You Need To Do Before Cleaning?

Before cleaning pavers stone, you should clean your pavers of loose dirt such as sand, dust, and leaves. Use a broom with soft bristles to do this, as scratchy bristles could damage the stones. Before cleaning pavers, also note which paving stones you have used in your outdoor area. A distinction is made between concrete, concrete composite, and natural stone pavers. Depending on which of these types you have used, you will need to clean the pavers differently. The ways with which you can clean natural stone pavers would destroy concrete pavers. The other way around wouldn’t be as fatal, however, the cleaning might not quite meet your needs if you don’t follow the proper procedure. If you are unsure of what type of stone it is, they can do a quick acid test before laying pavers. To do this, apply a small drop of acid to an inconspicuous spot on the stone. If white foam forms on the spot, it can be assumed that the lime in the stone reacts with the acid. If this is the case, which is often the case with concrete and marble, the paving stones should be cleaned without acid or acidic cleaning agents

Cleaning Pavers With Cleaning Agents

There are plenty of green coat removers, moss, and algae removers on the market. If you don’t have a lot of time or don’t want to scrub so hard, these cleaning agents are a good choice. However, they also contain a lot of chemicals and pose a danger to humans, animals, and the environment. If you want to use chemical cleaners, remember that they should not come into contact with plants and should only be used sporadically.

How To Clean Pavers On Your Patio In Easiest Way ?

Overview: Cleaning Paving Stones

Pressure washers are the most effective way to clean sidewalks

Start with low water pressure and test in an inconspicuous place whether the stones are suitable for high-pressure equipment

Use surface cleaner for concrete and hard stone pavers; lukewarm water, soft brush, and pH neutral cleaner for soft, porous natural stones

For environmental reasons, use biodegradable cleaning agents such as STIHL Stone & Facade Cleaner CS 100 and observe local wastewater regulations.

Other options: neutral soft soap or, for concrete stones, a soda-water mixture using protective goggles

Cleaning Paving Stones: High-Pressure Cleaners

Cleaning-Paving-Stones-with-High-Pressure-Cleaners

Pressure washers are an effective way to rid your walkways of dirt and weeds. The high water pressure dissolves even the most stubborn dirt and cleans stone by stone quickly and thoroughly. A pressure washer is especially effective for large areas: the job is done quickly, without much effort.

Cleaning the paving stones with a high-pressure cleaner is easier and yet completely free of chemicals. However, it is best to use high-pressure cleaners only on hard stones such as granite and basalt or industrially manufactured concrete stones. Softer stones can be damaged by the high pressure and only more dirt will settle in damaged stones.

A Few General Tips To Keep In Mind When Working With A Pressure Washer:

Not all pavers may be cleaned with a pressure washer. Concrete pavers and hard stone pavers can be cleaned with low water pressure, such as with an area cleaner. The first test in an inconspicuous place is how the stones react and whether the stones are suitable for cleaning with the high-pressure cleaner.

The surface cleaner works particularly gently and without spraying so that the surroundings remain clean during cleaning. When using the flat-jet nozzle, make sure that the nozzle is at a sufficient distance from the paving stones.

Do not work when it is raining or in a damp environment.

Step 1: Remove Coarse Dirt From The Pavers Stone

Clear the area to be cleaned. Roughly sweep up dirt and leaves before cleaning with the pressure washer. Use a leaf blower or vacuum shredder to get this job done in no time.

Step 2: Clean Paving Stone Joints

Clear the joints of moss and weeds, as the roots will damage the pavers in the long run. What many don’t know: Using pesticides on paving stones is prohibited by law. From there, the environmentally harmful chemicals can get into the soil and groundwater and pollute them.

For joints that are filled with high-grade chippings or sand, it is best to work with a joint scraper or wire brush. A pressure washer can also be used on open joints. After cleaning, simply refill the material that has been flushed out. Closed joints can be easily cleaned with a high-pressure device.

Removing Weeds With A High-Pressure Cleaner

Removing moss and weeds from joints can be tedious and time-consuming. Using a high-pressure cleaner makes it easier for you: You can clean organic soiling with pure water pressure, saving water and without adding cleaning agents. This way you do yourself and the environment a favor.

Weed control with the high-pressure cleaner also delivers long-lasting results. The water jet penetrates between each stone and flushes away not only the plants but also their seeds, slowing weed growth.

Step 3: Clean Pavers

Coarse dirt and weeds removed, and now it’s the turn of the pavers.

In the case of particularly heavy soiling, apply the cleaning agent straight away with the high-pressure cleaner and allow it to take effect. STIHL’s CS 100 Stone and Facade Cleaner reliably dissolve stubborn green deposits, emission dirt, soot, and dust. The solution is biodegradable and compatible with any STIHL high-pressure cleaner.

Step 4: Replenish Joints of Pavers Stone

If too much material was flushed from the joints during cleaning pavers, refill it. This is important to prevent the pavers from shifting afterward and creating voids.

Cleaning Paved Paths: Legal Requirements

Water used in cleaning pavers may be contaminated with chemicals, acids, and other pollutants. These must not be allowed to enter the sewage system or groundwater. To ensure this, the disposal of dirty water in Germany is governed by legal regulations. These vary from place to place, and violations can result in fines.

Find out in detail about the regulations in your municipality before you clean the paving stones.

✅ READ :   4 Easy Ways Restore Pavers To Make It Look New Again

Leave a Reply

Your email address will not be published.